A unique tone machine that has all the punch necessary to instigate a hit jam session. This amplifier offers an all-octal tube compliment. The versatility of the pre-amp can provide pristine sustaining cleans to seriously heavy overdrive and everything in between. Harmonic content is rich and sultry due to the individually selected 6SJ7-GT. A compression knob adds control in not only the tubes voice and clarity but the overall feet of attack and response.
A modified three-band Baxandall EQ shapes tone over a wide dynamic range. Audio Eyra’s own reverb circuit with internal spring tank adds subtle thickness and space to each note. Lush tremolo rounds out the effects that are built-in. Reverb and tremolo are controllable by front panel switches or supplied foot switch. The Customer can also upgrade output tubes to NOS 5881’s or 6550’s for an additional charge- subject to availability and brands vary.
Mains: 125VAC US Domestic; 100/230/240 VAC available for export
Configurations: Single Input
Pre-amp: V1 - 6SJ7GT, various NOS selection
Effects: V2,3 Reverb with Dwell and Mix Controls; 6SL7-GT(x2)
V4 - Tremolo with Speed and Depth; 6SL7GT
Phase Inverter: V5 - 6L7GT
Power Amplifier: V6,7 - 6L6GC; 5881; or 6550
Rectifier: V8 - 5U4GB; or GZ34; switchable to Solid State
Power: ~42 watts
Weight: Amplifier: 36.4 lbs
Speaker Cabinet: Loaded with two (2)
Dimensions: Amplifier: 20.5” W -13” H(w/ handle) - 11.5” D
2×12 Vertical: 21.75” W - 30.5” H - 11.5” D
A unique tone machine that has all the punch necessary to instigate a hit jam session. This amplifier offers an all-octal tube compliment. The versatility of the pre-amp can provide pristine sustaining cleans to seriously heavy overdrive and everything in between. Harmonic content is rich and sultry due to the individually selected 6SJ7-GT. A compression knob adds control in not only the tubes voice and clarity but the overall feet of attack and response.
A modified three-band Baxandall EQ shapes tone over a wide dynamic range. Audio Eyra’s own reverb circuit with internal spring tank adds subtle thickness and space to each note. Lush tremolo rounds out the effects that are built-in. Reverb and tremolo are controllable by front panel switches or supplied foot switch. The Customer can also upgrade output tubes to NOS 5881’s or 6550’s for an additional charge- subject to availability and brands vary.
Mains: 125VAC US Domestic; 100/230/240 VAC available for export
Configurations: Single Input
Pre-amp: V1 - 6SJ7GT, various NOS selection
Effects: V2,3 Reverb with Dwell and Mix Controls; 6SL7-GT(x2)
V4 - Tremolo with Speed and Depth; 6SL7GT
Phase Inverter: V5 - 6L7GT
Power Amplifier: V6,7 - 6L6GC; 5881; or 6550
Rectifier: V8 - 5U4GB; or GZ34; switchable to Solid State
Power: ~42 watts
Weight: Amplifier: 36.4 lbs
Speaker Cabinet: Loaded with two (2)
Dimensions: Amplifier: 20.5” W -13” H(w/ handle) - 11.5” D
2×12 Vertical: 21.75” W - 30.5” H - 11.5” D
The Audio Eyra OG provides the player exceptional tonal response, versatility and compact design that is suited for the local gig, tour or studio session. The Original Gangster was developed by Tim Thompson in 2022 based on circuitry influenced by vintage Gibson amplifiers’ pre-amp tube - the 6SJ7-GT. Given its almost “hi-fi” capabilities and unique single-ended driver and output section were devised to take that performance to very usable output levels.
This Class A amplifier provides the musician with rich and complex tone that is vibrant with musical information. The Circuit’s transparency maintains the individual instrument’s characteristics throughout the volume range, no matter the level of overdrive. Speed and Sensitivity live within this chassis.
The first front panel control is the input attenuator. It’s purpose? To tame hot input signals that may be present from various pedals. This provides provides a control to tweak the interface between outboard effects and the reaction of the pre-amp. Second, the user can control the internal compression of the 6SJ7 or 6SK7 pre-amp tube. Tone and Volume controls round out the front panel interface.
On the rear panel you will finds a selector switch that will move the rectification from tube to solid state. This adds further flexibility in attack and full-volume feel. The user can substitute 5AR4, 5U4GB, or 5Y3GT rectifiers for various levels of tightness and/or “brown sound”.
Mains: 125VAC US Domestic; 100/230/240 VAC available for export
Configuration: Single Input
Pre-amp: V1 - 6SJ7GT or 6SK7GT, various NOS selections
Driver: V2 - 6SN7GT or 6SL7GT
Power Amplifier: V3 - 6l6GC, 5881, 6550, or optional wiring for KT66
Rectifier: V5 - 5AR4; 5U4GB;5Y3GT; Switchable to Solid State
Power: ~25 watts, Single-Ended, Class A
Weight: Amplifier: 28 lbs
Speaker Cabinet: Audio Eyra Co. - Scholz Alnico 12” (AEC-12SA)
Dimensions: Amplifier: 13.75” W - 12.5” H(w/handle) - 10.5” D
1x12 Speaker Cabinet: 20.25” W - 22.5”H - 13” D
Our little, unconventional, Green-Eyed Monster.
This cabinet is a one-of-a-kind from our upholstery team! Covered in a copper micro-suede and dressed with chrome, lipped corners.
The pre-amp is our beloved 6SJ7GT pentode driving a dual triode 6SL7GT into a single-ended output section featuring a 6L6WXT. The power section utilizes a 5U4GB rectifier. The output is about 20-25, depending on the output tube selection.
The depth of instrumentality in this combo is quite astounding. If you’re looking for a balanced sound that emphasizes lush and beautiful, over-driven mid-range while maintaining detail and clarity... look no further! Front panel controls are.
Input Sensitivity - Fine tune how hard you slam the front end with this control.
Compression - Control the internal compression of the 6SJ7 tube by adjusting this knob.
Tone & Volume -You know what to do with that.
Custom speaker cabinet covered in textured woven fabric with a matte black grill cloth. Dressed with gloss black lipped corners and black side-handles. A one-of-a-kind from our upholstery team!
Cabinet comes loaded with two (2) of our Audio Eyra Company - Scholz Alnico 12” (AEC-12SA) speakers.
Specifications
Dimensions
29.5”×12”×22.5” w/ rubber feet
Speakers
Information can be found at https://www.audioeyra.com/aecspeaker .
A one-of-a-kind from our wood shop!
Custom combo cabinet crafted from Canary hardwood and finished with a natural rattan grill. Dressed with chrome, lipped corners and a black top handle.
Comes loaded with our Audio Eyra Company - Scholz Alnico 12” (AEC-12SA) speaker.
Specifications
Dimensions
Speaker
Information can be found at https://www.audioeyra.com/aecspeaker .
Custom speaker cabinet covered in a textured brown synthetic leather with a tightly woven cream and tan all-weather resin wicker grill cloth. Dressed with chrome lipped corners and black side-handles. A one-of-a-kind from our upholstery team!
Cabinet comes loaded with two (2) of our Audio Eyra Company - Scholz Alnico 12” (AEC-12SA) speakers.
Specifications
Dimensions
29.5”×12”×22.5” w/ rubber feet
Speakers
Information can be found at https://www.audioeyra.com/aecspeaker .
| One size | |
|---|---|
| Crown height, in | 6.50 |
| Diameter, in | 7.00 - 7.75 |
| Circumference, in | 21.65 - 23.62 |
| Visor length, in | 2.76 |
| 6oz | |
|---|---|
| Height, in | 4.45 |
| Width, in | 3.66 |
This custom embroidered knit beanie combines style, comfort, and durability. Made from a breathable cotton blend of 60% cotton and 40% acrylic, it offers a soft, lightweight feel that’s perfect for year-round wear.
The form-fitting design provides a snug and comfortable fit, ensuring it stays in place while keeping you warm. With its one-size-fits-most design, this beanie is versatile and can easily be personalized with your unique embroidery, making it a standout accessory in any wardrobe. Whether you're lounging or out on the go, this beanie adds both flair and functionality to your look.
.: 60% cotton, 40% acrylic
.: Breathable cotton blend
.: Form-fitting shape
.: One size fits most
This custom embroidered knit beanie combines style, comfort, and durability. Made from a breathable cotton blend of 60% cotton and 40% acrylic, it offers a soft, lightweight feel that’s perfect for year-round wear.
The form-fitting design provides a snug and comfortable fit, ensuring it stays in place while keeping you warm. With its one-size-fits-most design, this beanie is versatile and can easily be personalized with your unique embroidery, making it a standout accessory in any wardrobe. Whether you're lounging or out on the go, this beanie adds both flair and functionality to your look.
.: 60% cotton, 40% acrylic
.: Breathable cotton blend
.: Form-fitting shape
.: One size fits most
No results match your search. Try removing a few filters.